Notching wood without CNC using notching machine MZ 02 90F A
Technical features
- Precise cutting of radius interior corners without CNC
- Diamond cutters for very high precision
- Precise, tactile milling on the workpiece
- Seamlessly cut from top to bottom
- Workpiece thickness up to 60 mm
- Mobile, lightweight, hand-held, flexible to use
2.910,00 € without VAT.
Problem:
After CNC milling, internal corners have a radius. This radius often has to be removed manually—with a file, chisel, or jig saw—which leads to time loss, uneven results, and increased waste.
Solution:
The Notcher MZ 02 90F A removes the rounding in interior corners Fast, precise and reproducible. It generates a Sharp-edged interior corner, Without a CNC milling machine, without manual finishing and without burrs.
How it works
- Position the stop housing in the inside corner
- Pulling the starting lever: the engine turns over, the cylinder is pulled back
- Tapping milling through the plate
- Release the start lever and return the engine to the starting position
- Second milling pass after turning the plate to achieve a perfect interior corner without any protrusions
Technical highlights
- Precise cutting of wood without CNC
- Very high accuracy (hundredths of a millimeter)
- Diamond cutters are preset in the delivery box
- No outbreaks on deck layers
- Lower risk of committee failure
- Ideal for wood and plastic
- Proven for over 12 years in the trade and industry
- Manufactured in meticulous, handcrafted individual production
- Flexible to use
Use cases
- Finishing Radius Interior Corners on Worktops
- Precise interior corner machining without CNC
- Cutouts and notches in wood and plastic
- Precision milling for high-quality visible surfaces
- Use in carpentry, cabinetmaking, furniture construction, industry
Before:
The inner corner has a CNC radius that must be removed manually — often inaccurately, time-consuming, and with the risk of breakouts
Later:
The radius is cleanly removed, the inner corner is sharp-edged and precise — without a jigsaw, without a file, without manual finishing.
Scope of delivery
- Machine Ausklinker MZ 02 90F A
- Diamond cutters, assembled and pre-adjusted
- Test run on wood/plastic at the plant
- Standard equipment compressed air equipment oil
- Operating instructions
- Tool
Technical data
| Characteristic | Value |
|---|---|
| Drive system | Pneumatic pressure air motor |
| Pressure | 6 bar limited |
| Rotation speed | The engine turns when the start button is pulled. |
| Air consumption | Standard compressed air operation |
| Milling cutter | Diamond cutters, preset |
| Screwdriver | assembled |
| Base plate | Mounting housing + guide |
| Hub | 60 mm |
| Materials | Wood, plastic |
| SKU | notching-without-cnc-with-notching-mz-02-90f-a |
Would you like to test our product or purchase it?
Process
Workflow:
1. Attach the mounting housing to the inner corner
2. Lift the movable part by about 1mm and pull the start lever: The motor turns and the cylinder is pulled back
3. Continuously and slowly lower the movable part.
4. The rotating cutter cuts out the radius.
5. Release the start lever, slide the starter ring out about 3 mm from the corner and push the engine back into the starting position.
